Condition monitor CM-1001 is used for minimizing damage of rotating machinery by continuously monitoring health condition of the rotating machinery. For instance, detecting broken cutting tool of machine tool, diagnosis of pump-motor trouble are effective.
CM-1001 including data logger function. Then it can record machine condition in microSD form just before the trouble. This function will be very useful to prevent recurrence.
Features of CM-1001
- Over-all vibration monitoring
- Number of Monitoring channel is 1.
- Acc-peak, Acc-rms, Acc-CF, Vel-rms, Disp-EQV are measured and monitored simultaneously. Alarm and Trip setting value are confirmed easily when monitoring.
- Alarm level and Trip level can set independently. Each level is set at 5% to 99.9% of full scale in 0.1% step.
- Alarm and Trip comparing delay time can be set from 0 to 9.9 seconds in 0.1 second step.
- Alarm and Trip resetting time can be set from 0 to 99.9 seconds in 0.1 second step.
- Data logging function with microSD card up to 32 GB.
- Data transfer to PC via USB port.
- LCD Screen image storage function
- 5 external inputs are equipped as standard for monitoring start, external resetting etc.
- 5 external outputs are equipped as standard not only for alarm, trip but also sensor disconnection alarm etc.
Options of CM-1001
- Frequency band monitoring
- Unbalance vibration monitoring
- Harmonic vibration analizing
- Time waveform observation function
Specifications
| Model | CM-1001 |
|---|---|
| Measuring range | |
| Number of input channel | 1 |
| Applicable vibration sensor | Piezoelectric accelerometer |
| option: Electro-dynamic vibration sensor (max. ±5V, input impedance 100kΩ) | |
| option: Optical position detector (max. ±5V, input impedance 100kΩ) | |
| Measuring and frequency range | Acceleration: 0.1 to 40m/s² 10Hz to 20kHz ±3dB Velocity: 0.1 to 200mm/s 10Hz to 1kHz ±1.5dB (based on JIS B0907-1989) Displacement: 1.0 to 5000μm 10Hz to 1kHz±1.5dB |
| Measuring mode | Acceleration: 0-peak, True rms, Crest Factor Velocity: True rms Displacement: derived peak-peak Above data are indicated simultaneously and time graph is displayed. |
| Analysis and Monitoring mode | |
| Over-all vibration monitoring | Include |
| Frequency band monitoring | option |
| Unbalance vibration monitoring | option |
| Harmonic vibration analysis | option |
| Time waveform observation function | option |
| FFT analysis | N/A |
| Thresholds | |
| Setting range | 5 to 99.9% of Full Scale. Each item of measuring mode. |
| Monitor output | |
| Alarm | Output when measured value exceed set alarm level |
| Trip | Output when measured value exceeded set trip level |
| Power supply malfunction alarm | Output when power supply lost |
| “Under monitoring” output | This signal is active during monitoring | “Operation mode” output | This signal indicates operation mode is “Remote” or “Local”. |
| Output rating | Open collector output (DC30V 50mA) Contact rating for power loss: DC24V,1A or AC125V,0.3A |
| External input | |
| Command of start monitor | Active only at remote operation |
| Reset command for alarm | Alarm output is reset and Trip output not reset |
| Reset command for Trip | Trip output is reset |
| Remote Local switching | Switching Remote mode and Local mode |
| Command of Power On | Power on at remote mode |
| Input rating | Photo Coupler input (DC12V,10mA) |
| Others | |
| USB Port | Data transfer to PC, Storage LCD screen image |
| Data storage | Storage of measured data in microSD card. Storage LCD screen image(32GB Max.) |
| Display | 3.5 inch TFT color LCD |
| Operation | Dialog with touch screen |
| Environment | Temperature: 10 to 30°C (without condensation) Humidity: 20 to 80% |
| Power supply | AC100 to 240V ±10% 50/60Hz |
| Dimension | 170 (W)x 35.5 (L)x 95 (H)mm |
| Mass | 350g |
| Accessories | |
| Vibration sensor | Piezoelectric Accelerometer, Model:P12SC (Sensitivity: 10pC/ (m/s²) ) Fixing magnet: KM-025C (Adsorption force 100N) Connecting cable: LN-041 (2.5m) |
| Rotation sensor | SFS-M1H Fixing magnet: DG1030 |