Sigma Electronics

User Support Japanese

User Support Japanese



Fully automatic Vertical 2-plane balancing machine

Fully automatic balancing machine for motor of EV or HV etc. Once workpiece is mounted on the machine, measurement and correction are performed at same arrangement. Correction of unbalance is performed by lathe-unit.

  • Balancing plane : 1 and 2 planes
  • Workpiece Mass : 30kg max.
  • Rotor dia.: ø350mm max.
  • Chucking adapter : Pneumatic chuck
  • Balancing Speed : 800min-1
  • Min. Achievable Unbalance :1.0 μm

Motor armatures for EV or HV, brake disks, Flywheel, etc.


  • Fully automatic
  • Fully automatic operation from measurement to correction without set‐up change.
    High-accuracy balancing because no cumulative error of reattaching.

  • Unbalance correction by lathe-unit
  • High accuracy unbalance correction
    No step after cutting, suitable for fluid machinery parts.

  • Auto loader/unloader unit -optional
  • Also available Auto loader/unloader type (AHVS2-6130AT)

  • Small foot print
  • Built-in spindle motor
  • Steady measurement because there is no transmission component which is cause of disturbing vibration.


Specifications: SHVA2-6130Aseries

Model SHVA2-6130A (SHVA2-6130AT: with auto loader/unloader)
Workpiece Weight range 3 to 30kg
Diameter range ø100 to 350mm
Max. surface waviness less than 1mm
Mechanical unit Chucking adapter Manual fixing or pneumatic operated diaphragm chuck
Balancing speed 800min-1
Bearing support system Hard type
Measuring unit Balancing plane 1 and 2planes
Min. Achievable Unbalance 1.0µm
Tact time 58sec. at 115 g-cm initial unbalance
Graphic display 10.4" TFT color LCD with touch screen
No. of stored work data 100 data (No limitation when use with USB memory)
Others Power supply 3 phase 200V ±10%
Pneumatic supply requirement 0.5MPa
Option Tip conveyer
Dimensions 850(W) × 1,200(L) × 1,640(H)mm (without tip conveyer, auto loder/unloder)
Mass Approx. 1,200kg

Copyright © SIGMA Electronics, All rights Reserved.